Scientific Operations



STTY(I)                      6/12/72                      STTY(I)



NAME
     stty - set typewriter options

SYNOPSIS
     stty [ option ... ]

DESCRIPTION
     Stty  sets  certain  I/O options on the current output type-
     writer.  With no argument, it reports the  current  settings
     of  the  options.   The option strings are selected from the
     following set:

     even      allow even parity
     -even     disallow even parity
     odd       allow odd parity
     -odd      disallow odd parity
     raw       raw mode input (no erase, kill,  interrupt,  quit,
               EOT; parity bit passed back)
     -raw      negate raw mode
     cooked    same as `-raw'
     -nl       allow carriage return for new-line, and output CR-
               LF for carriage return or new-line
     nl        accept only new-line to end lines
     echo      echo back every character typed
     -echo     do not echo characters
     lcase     map upper case to lower case
     -lcase    do not map case
     -tabs     replace tabs by spaces when printing
     tabs      preserve tabs
     ek        reset erase and kill characters back to  normal  #
               and @.
     erase c   set erase character to c.
     kill c    set kill character to c.
     cr0 cr1 cr2 cr3
               select style of delay for carriage return (see be-
               low)
     nl0 nl1 nl2 nl3
               select style of delay for linefeed (see below)
     tab0 tab1 tab2 tab3
               select style of delay for tab (see below)
     ff0 ff1
               select style of delay for form feed (see below)
     tty33     set all modes suitable for Teletype model 33
     tty37     set all modes suitable for Teletype model 37
     vt05      set all modes suitable for DEC VT05 terminal
     tn300     set all modes suitable for GE Terminet 300
     ti700     set all modes suitable for Texas  Instruments  700
               terminal
     tek       set all modes suitable for Tektronix 4014 terminal
     hup       hang up dataphone on last close.
     -hup      do not hang up dataphone on last close.
     0         hang up phone line immediately
     50 75 110 134 150 200 300 600 1200 1800 2400 4800 9600  exta
               extb
               Set  typewriter  baud rate to the number given, if


                              - 1 -




STTY(I)                      6/12/72                      STTY(I)


               possible.  (These are the speeds supported by  the
               DH-11 interface).

     The  various  delay algorithms are tuned to various kinds of
     terminals.  In general the specifications ending in `0' mean
     no delay for the corresponding character.

SEE ALSO
     stty(II)

BUGS















































                              - 2 -